***Remanufactured Aftermarket Parts, Lower Prices In Larger Quantities Of 100 Or More! ****Small Order Charge Of $4.50 For Orders Under $10.00
Ferrule Glides with Internal Holding Clip
1-1/4 inch diameter base and will swivel up to a 34 degree angle, allowing the base to remain flat on the floor. Internal Clip Holds Tubing. Case Hardened steel base for long life in high use conditions. Internal Clip Holds Tubing
Part#
Size Of Tube
Base Material
Price Each
Qty Outside
Inside
F-3627
5/8"
1/2"
Steel
$1.78
F-3680
11/16"
1/2"
Steel
3.18
F-3757
3/4"
9/16"
Steel
2.74
F-1873
7/8"
3/4"
Steel
2.90
F-1103
1"
7/8"
Steel
2.54
F-8000 1-1/8" 1" Steel 2.79 F-3627-N
5/8"
1/2"
Nylon
2.72
F-3757-N
3/4"
9/16"
Nylon
2.74
F-1873-N
7/8"
3/4"
Nylon
2.90
F-1103-N
1"
7/8"
Nylon
2.62
F-8000-N 1-1/8" 1" Nylon 2.79 F-8000-ADJ 1-1/2" 1" Nylon 3.10
Ferrule Glides with Outside Holding Clip
The F-1626 and F-1626-N Glides have a 1-1/8" diameter base and grab onto the outside of the popular 5/8" (outside) diameter tube. It is original equipment used by many chair manufacturer We also offer the Heywood Wakefield glide that fits the 9/16" (outside) tubing on their chairs.
Heywood Wakefield
Part#
Size Of Tube
Base Material
Price Each
Qty Outside
Inside
F-1623
9/16"
7/16"
Steel
$1.99
F-1626
5/8"
1/2"
Steel
1.80
F-1626-N
5/8"
1/2"
Nylon
2.54
Glide Caps These will fit over the base of metal glides to protect delicate floors from scratching and act a a "retread" that will extend the life of the glide. Measure the glides base outside diameter for fit.
Non-Marking White Plastic Caps
shown installed
Part#
Glide Base Diameter
Price Each
Qty GC-116
1-1/16"
$.90
GC-136
1-3/16"
.93
GC-114
1-1/4"
1.18
GC-138
1-3/8"
1.68
GC-112
1-1/2"
1.67
Felt Base Glide Caps - Special Type
Felt Base Glide Cap Have a snap-on base with molded-in carpet fibers. They extend the life of the chair glide and make classrooms quieter. Available in two sizes, both fit onto a 1-14" base glide with a glide foot corner height of 1/4" or 5/16"
Glide Puller For Easy Removal
This tool is used to grab the glide base and literally tear the glide off of the chair leg. The steel clip is simply left up inside the tube. $38.50 each
site# C641
Platform Glides An internal rubber cushion separates the chair leg from the Case hardened steel glide base. This provides a silencing action for a quiet movement of the furniture. Round
Plastic Cap Glides
Popular on stack chairs, the clear plastic cap acts as a cushion that keeps the finish of chair legs from scratching during stacking. Case Hardened steel base for long life. 7/8 inch base diameter.
Nail-On Glides
The nail is molded into the base for strength and silencing action. There is a rubber cushion that rests between the glide base and your furniture. Metal base is case hardened steel for long life under heavy use.
Also Available in White Plastic Base
Nail On Glide- Metal Base
N-20XX
Nail On Glide- Plastic Base
PN-20XX
For Long life under heavy use
Part#
Base Diameter
Base Material
Price Each
Qty N-2087
7/8"
Steel
$.87
PN-2087
7/8"
Plastic
.87
N-2101
1-1/8"
Steel
.99
PN-2102
1-1/8"
Plastic
.90
Adjustable Glides
Plastic Base Plastic base with metal cover shell. Diameter is 1-1/8". Nickel plate cover shell gives "chrome" quality appearance. White color bottom.
Rubber Cushion Glides have the machine screw molded into the base to offer a "silencing" effect when furniture is moved across the floor. 1-1/16" base diameter. Base is case hardened, nickel plated steel for long life under heavy use.
Plastic Thread
Part # Size/Length Price ea Qty A-2505 1/4-20x 1/2" 1.40 A-2505-BR 1/4-20x 1/2" 2.48 A-2505-NS 1/4-20x 1/2" 3.28 A-2510 1/4-20x 1" 1.16 A-2510-NS 1/4-20x 1" 2.80 A-2515 1/4-20x 1-1/2" 1.60 A-5010 5/16-18x 1" 1.28 A-5012 5/16-20x 1-1/2" 1.76 *BR=Brass *NS=Non-skid Rubber A-5640
1/4-20x 1/2" .96 A-5640-SS 1/4-20x 1/2" 11.84 A-5641 1/4-20x 1" .96 A-5651 5/16-18x 1" 3.08 A-5683 8-32x 1/2" 2.92 *SS=Stainless Steel Base
Jumbo
Thread shown without hex nut
Small Plastic Adjustable Glide Small Plastic Adjustable Glide have threaded studs molded into the plastic base. Plastic Base Adjustable Glides
1-1/8 inch Plastic Base Diameter Part#
Thread
Color
Price Each
Qty
A-3140W
1/4-20 x 1/2"
White
$1.86
A-3140B
1/4-20 x 1/2"
Black
1.86
A-3141W
1/4-20 x 1"
White
1.71
A-3141B
1/4-20 x 1"
Black
1.71
A-3151B
5/16-18 x 1"
Black
1.77
Small 5/8" base diameter and knurled edges make this glide a popular choice for small equipment.
Close-up view of Rounded Bottom
Part#
Thread
Color
Price Each
Qty A-1140R-BL
1/4-20 x 1/2"
Black
$1.26
A-1141R-BL
1/4-20 x 1"
Black
1.26
Adjustable Swivel Glide Propeller Nuts Good where you need a thread, but do not want the teeth of a T-Nut biting into the wood. Ribs hold onto the inside of the hole allowing for easy installation.
Part#
Thread Size
Thread Height
Price Each
Qty
HPN-5
5/16"-18
3/8"
$.89
HPN-4
1/4"- 20
1/2"
.96
Part # Description Price Qty AS-2510 Metal Base $3.16 ea
AS-2510-N Nylon Base $3.16 ea
Weld Cups and Inserts
The classic way to finish the bottom of patio furniture. The steel cup is welded onto the end of metal rod or tubing. The insert is then placed into the weld cup to act as the glide surface. The weld cup finish is raw steel. Choose from two standard diameters. The standard center hole is 3/8 inch diameter. Other sizes are available, please inquire. Metal Weld Cup and Plastic Glide Being Installed Metal Weld Cup Plastic Glide
