Heavy Duty Mechanisms

site# C662 Office Swivel Chair Mechanism
Complete with 1" threaded post, small #74 bell and washer as shown
Any other bell desired will be shipped as an "add-on" item not installed.
There are TWO 13-1/2" Models available.
Style # 01 475...$138.48
Qty :
Size :

Conical Spring Post Mechanism
Post, Bell & Washer are included.
Style# 02483...$124.16
Qty :

Lazy Boy Swivel Chair Mechanism

Virtual replacement for many La-Z-Boy and many other Office chairs. Slotted screw holes permit installation width variable between 5-1/2" and 6-1/2". Mechanism is shipped as shown complete with Bell, Washer and 1" threaded Post. Meets industry BIFMA/ANSI testing standards, your assurance of quality.
La-Z-Boy with 14" length measured hole to hole
Style # 04484...$143.95
Qty :
Click here for Lazy Boy Installations Instructions Click here for Eames Replacement Instructions

Replacement Kitchen, Club, Poker, Eames® (type) Tilter swivel. Original equipment mechanism's fit most applications.
#402 Tilter, 5 1/4" x 5 1/4" on centers holing
(Also fit's holing 6-1/4" long)
Heavy duty 10 gauge steel
Weight 6 lbs.
Shaft tapered, 1" diameter x 4 3/4"
Solid steel shaft pressed and welded
Solid steel 1 piece pivot pin
Heavy duty tension spring
Exceeds BIFMA/ANSI longevity and quality testing
Residential and Commercial use
Tilter Style #402...$80.00
Qty :

502 Tilter 5-1/4" x 5-1/4" on centers holing
12 gauge steel
Shaft 1" diameter x 4-3/8" long
(welded in place)
Heavy wall pipe (hollow)
Solid steel 1 piece pivot pin
Adjustable tension spring
Residential duty (as in original)
Tilter Style #502
$73.80
Qty :

Fit's 1-5/8" ID pipe-Insert Style #502A. Fit's most 1-3/4" OD pipe
1-21/32" OD Vertical groove Insert Style #502B
Fit's 1-7/8" ID pipe-Insert Style #502C Fit's many 2"-2 1/8" OD pipe
Fit's 2-1/16" ID pipe-Insert Style #502D Fit's many 2-1/4-2 3/8" OD pipe

Bolt to Floor Swivel Chair Bases
Bolt to floor swivel chair bases are chiefly used when a stationary chair is desirable. Idea development, special purpose chair, stool, or for use on stationary or portable table base systems.

This particular bolt to the floor swivel chair base has a wide variety of setups which can be used. Originally intended as a Jury chair base.

Automatic self return
Use with any Manual mechanism offered. Style #01 475 recommended.
7" and 9 1/4" standard heights, others can be special ordered
Left and right swiveling in degrees of, 45 left/right, 60 left /right, 90 left/right.
Heavy duty steel construction
# 515 includes 180Â° Cam
$ 138.75

Bolt down-Gas
(Manual available)

Base has 6 holes for bolting, 8-1/4" diameter. Textured powder coated and reinforced.

# 5724
Base Only
$45.50

Heavy Duty intensive Gas bolt down Jury base

All 50 mm size and column diameter gas cylinders are accepted. Bolt down plate is 1/4" thick plate steel with 6 bolt holes. No hole in floor necessary for cylinder operation

#517
Base only
$145.89

Gas Cylinder Columns
Style
Size
Price
Qty
Exposed height from top of base leg
62A
50mm Black painted steel
$31.50

4.50" to 5.50
62D
50mm Black painted steel
31.50

6" to 6.50"
62E
50mm Black painted steel
31.50

6.750" to 7"
62F
45mm Black painted steel
35.95

3-1/2" exposed
Includes adapter

Includes plastic liner.
Liners not sold separately

Bell Washers

Large headed give excellent safety protection
against ordinary screw "pull through" problems.

Mechanism Mounting Screws

.92 each... (indicate size desired)
Qty :
Size :
3/4"
1"
1-1/4"

Springs

Mechanism replacement springs, spring retainer plates,
threaded hooks, knobs and T-handles...all pre-owned.
Mix or match for minimum purchase.

All parts will be + or-some amount due to manufacturing process and selection.
For springs, supply length, width and thickness. I'll supply as close as possible.
*Pre-owned parts are not returnable.

Style #108...$18.95 includes shipping

Bearing Grease

Wizard Formula 41

Item# 1241 2oz. Container
Price $11.80 each

Originally developed by Dr. Harley Rand in the early 1960's to reduce friction and wear on metal-to -metal parts. It also reduces sound, vibration, is water resistant, and a rust and corrosion preventative!

Filing Systems (File Cabinets, Lateral Files Suspension, Vertical Files Suspension) ...and numerous other uses such as garage doors, desk drawers, keyboard tray suspensions, car door hinges, inside door hinges, sliding doors (when metal-to-metal is involved), gate hinges, window slides (when metal-to-metal is involved), flipper door units, ect.

Although many people believe that WD-40 is a degreaser formula; it is actually a de-lubricant! Using WD-40 on any metal-to-metal surfaces will eventually destroy the contact surfaces with rust and corrosion!

We recommend this marvelous formula for use on: Office Seating (gas lifts, chair cylinders, chair control mechanism)!

For More Parts

GSA Advantage Pricing Available!
Government Credit Cards Accepted

Product Development | Recycling News | Recycling News 2 | Satisfied Clients | Wizard News Directory Of Services & Posture Fit
Join Our Mailing List
» JOIN NOW
Need Help? E-mail: Problem Solver
Phone or Fax orders accepted...
Phone: 800-286-5471
Fax: 919-841-4764
* Prices shown are subject to change without notice.

Credit Cards accepted

Note: All charges will be billed under PROBLEM SOLVER
or make checks payable to PROBLEM SOLVER
*Shipping fees-added when Problem Solver processes your order.
A copy of your invoice-including shipping fee(s) will be emailed or faxed to you.
UPS Home Delivery Add'l Fee: $3.95
Orders of less than $10 in product will incur a $4.50 Minimum Order Fee.

Visit Our Sister Sites!
Oodlesofusedparts.com | WizardOfficeChairs.com | BusinessfurnitureShop.com

Contact US | Company Policy | Privacy Notice | Site Map

Replacement Kitchen, Club, Poker, Eames® (type) Tilter swivel. Original equipment mechanism's fit most applications.

.92 each... (indicate size desired)Qty:Size:3/4"1"1-1/4"

.92 each... (indicate size desired)
Qty :
Size :
3/4"
1"
1-1/4"